|
1.BILLETS :
150 178 190 203 216 228 243
1. Tolerance: +/- 2mm
2. Max. Length: 5 meters, +/- 10mm
3. Curvature: 3mm / meter
Casting Technique:
1. Hot Top Techniques
2. Air Slip
2.WIRE ROD :
- Diameters (mm) +/- 0.5mm: 9 & 9.5 mm
Outer diameter: 1350mm max.
Inner diameter: 540 mm
Height: 850mm +/-20mm
Weight: 2000 Kg’s Approx.
- Alloy: Casted Alloy 6060 - 6063 with Air Slip Technology.
3.HOT ROLLED PRODUCTS :
Alloy: 1XXX, 3XXX, 4XXX, 5XXX, 8XXX
Temper: F / O / H111
Thickness: 4 - 8 mm
Width: 1000 - 1650 mm
Length: 2000 - 6000
Alloy: 1XXX, 5XXX
Temper: F / O / H111
Thickness: 10 - 80 mm
Width: 1000 - 1650 mm
Length: 2000 - 6000 mm
Alloy: 1XXX, 3XXX, 4XXX, 5XXX, 8XXX
Temper: F / O / H111
Thickness: 4 - 8 mm
Width: 1000 - 1650 mm
I.D: 600 mm
O.D: 2000 mm max.
4.COLD ROLLED PRODUCTS :
Type: Not Levelled
Alloy: 1XXX, 3XXX, 5XXX, 8XXX
Temper: O / Hxx
Thickness: 2 - 2.5 mm
Width (mm): 150 - 1600 mm
I.D (mm): 400 - 500 - 600 mm
O.D (mm): 1100 - 1800 mm
Type: Levelled
Alloy: 1XXX, 3XXX, 5XXX, 8XXX
Temper: O / Hxx
Tickness: 0.3 - 2 mm
Width: 150 - 1600 mm
I.D: 400 - 500 - 600 mm
O.D: 1100 - 1800 mm
Type: Embossed Coils
Alloy 1000,3000,5000
Temper: H24
Thickness: 0.4 - 1 mm
Width: 150 - 1600
I.D: 400 - 500 - 600
O.D: 1100 - 1800
2. SHEETS:
Alloy Thickness(mm) Width(mm) Length(mm)
1000,3000, 0.5-8 800-1750 2000-6000
5000
3. EMBOSSED SHEETS:
Alloy Thickness(mm) Width(mm) Length(mm)
1050,1100 0.5-2.5 800-1750 2000-6000
3003,3004
4. CORRUGATED SHEETS:
Alloy Thickness(mm) Width(mm) Length(mm)
1050,1100,3003,3004, 0.3-1 800-1200 2000-6000
3105,5005,5050,5754
5. TREAD PLATES:
Alloy Temper Thickness(mm) Width(mm) Length(mm)
3003,5086 Hxx4 0.8-3 800-1750 2000-6000
5754
· Mechanical properties and tolerances acc. EN 485 standards.
LIST OF ALLOYS :
· Tempers F, O(H112) + all H Tempers to EN 485-2:
1050 3002 5005 5251
1060 3003 5049 5454
1100 3004 5052 5754
1200 3005 5083
1235 3103 5086 8011
1350 3105 5154 8079
· Other alloys can be produced by mutual agreement.
|
